This guide shows you how to reset your Arcadyan LH1000 router. This is not the same thing as rebooting a router. Unplugging a router from the wall reboots it. A Router Reset completely erases the router and returns it to factory settings.
Warning: Since this erases everything you have done to the router, there are some things you need to consider first. The following settings in your router will be changed:
- The router's login credentials are reset.
- Your WiFi login, password, and network name are reset.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- All port forwards, firewall settings, and parental controls that you have configured will be removed.
A router reset is the last step you should take in recovering your router's password. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other Arcadyan LH1000 Guides
This is the reset router guide for the Arcadyan LH1000 0.19.07r Telstra. We also have the following guides for the same router:
- Arcadyan LH1000 0.08.06r Telstra - Reset the Arcadyan LH1000
- Arcadyan LH1000 0.08.06r Telstra - Arcadyan LH1000 Screenshots
- Arcadyan LH1000 0.08.06r Telstra - Information About the Arcadyan LH1000 Router
- Arcadyan LH1000 0.08.06r Telstra - Login to the Arcadyan LH1000
Recover Password in Arcadyan LH1000
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
A router reset should be the last thing you try if you are unable to login.
Reset the Arcadyan LH1000
Most of the time you can find a small reset button located on either the back or the bottom of a router. A typical reset button looks like this:
Your reset button may look different, but usually they are very small. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.
Watch the lights on the front of your router and hold the reset button down for about 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.
Keep in mind that this will completely reset your Arcadyan LH1000 router.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Arcadyan LH1000
Now you need to log in using the factory default username and password. You can find all of the information that you need in our LH1000 Login Guide.
Change Your Password
You need to change your router's default password after you log in for the first time. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. Our Choosing a Strong Password guide can help you pick a strong password for your router.
Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.
Other Arcadyan LH1000 Guides
We have collected a lot of information about the Arcadyan LH1000 router. You can find some of our additional content here.
This is the reset router guide for the Arcadyan LH1000 0.19.07r Telstra. We also have the following guides for the same router:
- Arcadyan LH1000 0.08.06r Telstra - Reset the Arcadyan LH1000
- Arcadyan LH1000 0.08.06r Telstra - Arcadyan LH1000 Screenshots
- Arcadyan LH1000 0.08.06r Telstra - Information About the Arcadyan LH1000 Router
- Arcadyan LH1000 0.08.06r Telstra - Login to the Arcadyan LH1000