This page shows how to change the LAN IP Address on the Belkin F7D3402 router.
Other Belkin F7D3402 Guides
This is the ip address guide for the Belkin F7D3402 v1. We also have the following guides for the same router:
- Belkin F7D3402 v1 - Belkin F7D3402 User Manual
- Belkin F7D3402 v1 - Belkin F7D3402 Login Instructions
- Belkin F7D3402 v1 - Belkin F7D3402 Port Forwarding Instructions
- Belkin F7D3402 v1 - How to change the DNS settings on a Belkin F7D3402 router
- Belkin F7D3402 v1 - Setup WiFi on the Belkin F7D3402
- Belkin F7D3402 v1 - How to Reset the Belkin F7D3402
- Belkin F7D3402 v1 - Information About the Belkin F7D3402 Router
- Belkin F7D3402 v1 - Belkin F7D3402 Screenshots
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Belkin F7D3402
To get started configuring the Belkin F7D3402 LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Belkin F7D3402, follow our Belkin F7D3402 Login Guide.
Change the LAN IP Address on a Belkin F7D3402
If you followed our login guide above then you should see this screen.
Once you have logged into the Belkin F7D3402v1 you see the Status page for this Router. When you want to change your LAN IP Address, the address you are on while inside your local network, click the words on the left side bar labeled LAN Settings, which is under the heading of LAN Setup.
Configure the LAN section of your Belkin F7D3402
You are now on the LAN > LAN Settings page. Just enter your new address in the four boxes labeled IP Address. We highly recommend using an address that will be fairly simple to remember such as 10.0.0.1
Do not change any other setting on this page, simply click the choice labeled Apply Changes, and you have finished.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Belkin F7D3402 Info
Don't forget about our other Belkin F7D3402 info that you might be interested in.
This is the ip address guide for the Belkin F7D3402 v1. We also have the following guides for the same router:
- Belkin F7D3402 v1 - Belkin F7D3402 User Manual
- Belkin F7D3402 v1 - Belkin F7D3402 Login Instructions
- Belkin F7D3402 v1 - Belkin F7D3402 Port Forwarding Instructions
- Belkin F7D3402 v1 - How to change the DNS settings on a Belkin F7D3402 router
- Belkin F7D3402 v1 - Setup WiFi on the Belkin F7D3402
- Belkin F7D3402 v1 - How to Reset the Belkin F7D3402
- Belkin F7D3402 v1 - Information About the Belkin F7D3402 Router
- Belkin F7D3402 v1 - Belkin F7D3402 Screenshots