This page shows how to change the LAN IP Address on the Belkin F9K1112 router.
Other Belkin F9K1112 Guides
This is the ip address guide for the Belkin F9K1112 v1. We also have the following guides for the same router:
- Belkin F9K1112 v1 - Belkin F9K1112 Login Instructions
- Belkin F9K1112 v1 - Belkin F9K1112 User Manual
- Belkin F9K1112 v1 - How to change the DNS settings on a Belkin F9K1112 router
- Belkin F9K1112 v1 - Setup WiFi on the Belkin F9K1112
- Belkin F9K1112 v1 - How to Reset the Belkin F9K1112
- Belkin F9K1112 v1 - Belkin F9K1112 Screenshots
- Belkin F9K1112 v1 - Information About the Belkin F9K1112 Router
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Belkin F9K1112
To get started configuring the Belkin F9K1112 LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Belkin F9K1112, follow our Belkin F9K1112 Login Guide.
Change the LAN IP Address on a Belkin F9K1112
If you followed our login guide above then you should see this screen.
Let's begin this router IP address guide on the Status page of the Belkin F9K1112v1. From there you need to click the link in the gray sidebar, to the left, labeled LAN Settings. This is under LAN Setup.
Configure the LAN section of your Belkin F9K1112
You are now on the LAN > LAN Settings page. The very first setting on this page is called the IP Address and is referring to the LAN or Router IP Address. Go ahead and change this address to something easier to remember.
That's it, just click the Apply Changes button and you are finished.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Belkin F9K1112 Info
Don't forget about our other Belkin F9K1112 info that you might be interested in.
This is the ip address guide for the Belkin F9K1112 v1. We also have the following guides for the same router:
- Belkin F9K1112 v1 - Belkin F9K1112 Login Instructions
- Belkin F9K1112 v1 - Belkin F9K1112 User Manual
- Belkin F9K1112 v1 - How to change the DNS settings on a Belkin F9K1112 router
- Belkin F9K1112 v1 - Setup WiFi on the Belkin F9K1112
- Belkin F9K1112 v1 - How to Reset the Belkin F9K1112
- Belkin F9K1112 v1 - Belkin F9K1112 Screenshots
- Belkin F9K1112 v1 - Information About the Belkin F9K1112 Router