In this guide I will show you how to reset the Belkin F9K1112v1 router back to factory default settings. First there are two terms that are commonly confused. Let's discuss the difference between resetting a router and rebooting a router. To reboot a router means to cycle it's power. This is done by turning the device off, waiting about 30 seconds, then turning it back on. Some minor problems can be fixed this way. To reset the router is to take all the settings and revert every one of them back to factory default settings.
Warning: Resetting this router is a serious step. Be sure you know what to expect from this reset. We suggest creating a list of settings you know will be changed. We have started this list for you.
- The router's main username and password.
- The Internet name, and password.
- The Internet Service Provider username and password if you use DSL.
- Any other settings such as IP addresses or DNS addresses are erased.
Other Belkin F9K1112 Guides
This is the reset router guide for the Belkin F9K1112 v1. We also have the following guides for the same router:
- Belkin F9K1112 v1 - How to change the IP Address on a Belkin F9K1112 router
- Belkin F9K1112 v1 - Belkin F9K1112 Login Instructions
- Belkin F9K1112 v1 - Belkin F9K1112 User Manual
- Belkin F9K1112 v1 - How to change the DNS settings on a Belkin F9K1112 router
- Belkin F9K1112 v1 - Setup WiFi on the Belkin F9K1112
- Belkin F9K1112 v1 - Belkin F9K1112 Screenshots
- Belkin F9K1112 v1 - Information About the Belkin F9K1112 Router
Reset the Belkin F9K1112
Use a VPN Instead
Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.
We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.
When shopping for a VPN, make sure that they meet the following criteria:
- Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
- Make sure that your VPN provider has lots of exit nodes all around the world.
- Check that your VPN will not affect your speed.
- Verify that your VPN provider uses WireGuard as the underlying protocol.
- Many people prefer a VPN provider that is not based in the United States.
This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.
Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.
Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.
Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.
The first step in any reset is to locate the tiny reset button. This recessed button is normally found on the back or side panel of the device. We have found it for you and circled it in the following image.
Due to the recessed and tiny nature of this button you need to take a sharpened object such as an unwound paperclip or pin to press and hold the reset button for about 10 seconds. If you just press and release this button you will only reboot the router instead of resetting it.
Remember that resetting the Belkin F9K1112v1 router will erase every setting you have ever had on your router. It's a good idea to try other troubleshooting methods before continuing.
Login to the Belkin F9K1112
Now that the Belkin F9K1112v1 router has been reset you need to login to it using the factory default username and password. We have already found these for you and included them in our Belkin F9K1112v1 Login Guide.
Change Your Password
The next step is to change the default password that comes with the router. This password is what will keep others out of your router interface. Use this Choosing a Strong Password guide to help you come up with a good password.
Tip: To avoid having to reset the Belkin F9K1112v1 router again, you should write this password down on piece of paper and attach it to the bottom of the router for future reference.
Setup WiFi on the Belkin F9K1112v1
Finally, go ahead and take a look at the WiFi settings. These include the network name, Internet password, and security method. These are important to your network security. We recommend following the steps in this How to Setup WiFi on the Belkin F9K1112v1 guide.
Don't forget to sign up for NordVPN's promo deal before it's gone.
You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.
Belkin F9K1112 Help
Be sure to check out our other Belkin F9K1112 info that you might be interested in.
This is the reset router guide for the Belkin F9K1112 v1. We also have the following guides for the same router:
- Belkin F9K1112 v1 - How to change the IP Address on a Belkin F9K1112 router
- Belkin F9K1112 v1 - Belkin F9K1112 Login Instructions
- Belkin F9K1112 v1 - Belkin F9K1112 User Manual
- Belkin F9K1112 v1 - How to change the DNS settings on a Belkin F9K1112 router
- Belkin F9K1112 v1 - Setup WiFi on the Belkin F9K1112
- Belkin F9K1112 v1 - Belkin F9K1112 Screenshots
- Belkin F9K1112 v1 - Information About the Belkin F9K1112 Router