Setup Router logo in white Setup router name logo in white
Get Software

Reset the Pace Plc 5268AC

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 8 minutes

This guide shows you how to reset your Pace Plc 5268AC router. This is a much bigger deal than a router reboot. Every time your router loses power it reboots. Resetting a router erases all settings from it and returns it to factory defaults.

Warning: Since this erases everything you have done to the router, there are some things you need to consider first. The following settings in your router will be changed:

  • The router's username and password are reset.
  • All WiFi login information and network names are reset.
  • Your ISP settings are reset, which means you will have to contact your ISP to get them back.
  • Any parental controls, firewall settings, or port forwards will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.

Other Pace Plc 5268AC Guides

This is the reset router guide for the Pace Plc 5268AC 10.6.0.530094-att AT&T. We also have the following guides for the same router:

Recover Password in Pace Plc 5268AC

If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.

Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

Only after you have tried to recover your missing router username and password should you perform a full router reset.

Reset the Pace Plc 5268AC

On most routers you can find a small button on the back or the bottom labeled reset. A typical reset button looks like this:

Router Reset Button

Yours may look slightly different, but they are usually tiny. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.

Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. The blinking pattern of the lights on the front of the router should change when the reset is complete. Do not worry about holding the button down too long; this is harmless.

Remember, this will totally reset your Pace Plc 5268AC router.

This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.

Login to the Pace Plc 5268AC

After you are finished resetting your router, you need to login in using the original factory username and password. We have a 5268AC Login Guide with all this information ready for you.

Change Your Password

After logging in to your router for the first time, you need to change your router's password. Leaving a router password set to default is a very serious security risk. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: Write your new password down on a post-it note and stick it to the bottom of your router.

Other Pace Plc 5268AC Guides

This isn't our only Pace Plc 5268AC guide. We also have the following guides for this router.

This is the reset router guide for the Pace Plc 5268AC 10.6.0.530094-att AT&T. We also have the following guides for the same router: