Setup Router logo in white Setup router name logo in white
Get Software

Reset the Pace Plc 5268AC

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 8 minutes

This guide shows you how to reset your Pace Plc 5268AC router. This is not the same thing as rebooting a router. Turning a router off and back on again causes a reboot. A Router Reset completely erases the router and returns it to factory settings.

Warning: Proceed with caution; resetting your router can be a major headache. A router reset will affect the following settings:

  • The router's username and password are reset to factory defaults.
  • Your WiFi name and password are reset.
  • All ISP settings will reset to default, and you may have to contact your ISP.
  • Any port forwards, firewall settings, or parental controls that you have configured will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.

Other Pace Plc 5268AC Guides

This is the reset router guide for the Pace Plc 5268AC 11.4.1.532484-att AT&T. We also have the following guides for the same router:

Recover Password in Pace Plc 5268AC

Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.

Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

If you are unable to recover your lost router password, then you may have to proceed with a full router reset.

Reset the Pace Plc 5268AC

Usually there is a reset button located on the back or bottom of a router. Most reset buttons look like this:

Router Reset Button

Reset buttons are usually tiny. Yours may look slightly different than this. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.

Hold the reset button down for 10 seconds and watch the lights. The lights on the front of the router should do something different when the reset happens. Do not be concerned about holding the reset button down too long. It will not hurt anything.

Don't forget, this step will totally reset your Pace Plc 5268AC router back to factory settings.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Pace Plc 5268AC

Now that you have finished resetting the router, you need to login to the router interface using the default username and password. We have a 5268AC Login Guide with all this information ready for you.

Change Your Password

You need to change your router's default password after you log in for the first time. It's a very bad idea to leave your router's password set to the factory default. Our Choosing a Strong Password guide talks about choosing a strong password for your router.

Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.

Other Pace Plc 5268AC Guides

This isn't our only Pace Plc 5268AC guide. We also have the following guides for this router.

This is the reset router guide for the Pace Plc 5268AC 11.4.1.532484-att AT&T. We also have the following guides for the same router: