Setup Router logo in white Setup router name logo in white
Get Software

Reset the Pace Plc 5268AC

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 8 minutes

This guide shows you how to reset your Pace Plc 5268AC router to factory default settings. This is a much bigger deal than a router reboot. Turning a router off and back on again causes a reboot. A Router Reset completely erases the router and returns it to factory settings.

Warning: Before you continue, there are a few things you need to know. A router reset will affect the following settings:

  • The router's login and password are reset to factory defaults.
  • Your WiFi name and password are reset.
  • Any ISP settings saved in your router will be removed. You may have to contact your ISP.
  • Any parental controls, firewall settings, or port forwards will be removed.

Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other Pace Plc 5268AC Guides

This is the reset router guide for the Pace Plc 5268AC 11.1.0.531418-att AT&T. We also have the following guides for the same router:

Recover Password in Pace Plc 5268AC

If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.

Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.

Router Password Finder - Lost or Forgotten Router Password Recovery Tool

Do not do a full router reset until after you have tried every other option to log in to your router.

Reset the Pace Plc 5268AC

Most routers have a small button on either the back or the bottom. A typical reset button looks like this:

Router Reset Button

Yours may look slightly different, but they are usually tiny. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Hold the reset button down for about 10 seconds while watching the lights on the front of your router. The lights on the front of the router should do something different when the reset happens. It is harmless to hold the reset button too long.

Don't forget, this step will totally reset your Pace Plc 5268AC router back to factory settings.

Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Pace Plc 5268AC

After you are finished resetting your router, you need to login in using the original factory username and password. Our 5268AC Login Guide has all of the information that you need.

Change Your Password

After logging in to your router for the first time, you need to change your router's password. It's a very bad idea to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: Write your new password down on a post-it note and stick it to the bottom of your router.

Other Pace Plc 5268AC Guides

We have collected a lot of information about the Pace Plc 5268AC router. You can find some of our additional content here.

This is the reset router guide for the Pace Plc 5268AC 11.1.0.531418-att AT&T. We also have the following guides for the same router: