Setup Router logo in white Setup router name logo in white
Get Software

Reset the Pace Plc 5268AC

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 8 minutes

This is the reset guide for the Pace Plc 5268AC router. A router reset is very different than a router reboot. Rebooting a router is simply turning it off and back on again. However, when you reset a router you, return it back to its factory default settings.

Warning: Before you continue, there are a few things you need to know. A router reset will affect the following settings:

  • The router's login and password are reset to factory defaults.
  • All WiFi settings are reset, including network name and password.
  • Your ISP settings are reset, which means you will have to contact your ISP to get them back.
  • All port forwards, firewall settings, and parental controls that you have configured will be removed.

A router reset is the last step you should take in recovering your router's password. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.

Other Pace Plc 5268AC Guides

This is the reset router guide for the Pace Plc 5268AC 11.14.1.533851-att AT&T. We also have the following guides for the same router:

Recover Password in Pace Plc 5268AC

If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Lost or Forgotten Router Password Recovery Tool

A router reset should be the last thing you try if you are unable to login.

Reset the Pace Plc 5268AC

There is usually a small reset button located on either the back or the bottom of a router. Most reset buttons look like this:

Router Reset Button

Your reset button may look different, but usually they are very small. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.

Remember, this will erase everything you have previously done to this Pace Plc 5268AC router.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Pace Plc 5268AC

Once the reset is complete, you need to login to your router using the default IP address, username, and password. Our 5268AC Login Guide has all of the information that you need.

Change Your Password

After logging in, you should really change your router's password for added security. The factory default passwords for routers are very well known. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.

Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.

Other Pace Plc 5268AC Guides

If you want additional help with your Pace Plc 5268AC be sure to check out some of our other guides.

This is the reset router guide for the Pace Plc 5268AC 11.14.1.533851-att AT&T. We also have the following guides for the same router: