Setup Router logo in white Setup router name logo in white
Get Software

Reset the Sitecom WL-312

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 4 minutes

This guide shows you how to reset your Sitecom WL-312 router to factory default settings. A router reset is a much bigger deal than a router reboot. Every time your router loses power it reboots. A Router Reset completely erases the router and returns it to factory settings.

Warning: Before you continue, there are a few things you need to know. The following settings will be changed in your router:

  • The router's login and password are reset to factory defaults.
  • All WiFi settings are reset, including network name and password.
  • Any ISP settings saved in your router will be removed. You may have to contact your ISP.
  • Any port forwards, firewall settings, or parental controls that you have configured will be removed.

Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.

Other Sitecom WL-312 Guides

This is the reset router guide for the Sitecom WL-312 v2. We also have the following guides for the same router:

Recover Password in Sitecom WL-312

If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.

Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.

Router Password Finder - Lost or Forgotten Router Password Recovery Tool

Only after you have tried to recover your missing router username and password should you perform a full router reset.

Reset the Sitecom WL-312

There is usually a small reset button located on either the back or the bottom of a router. This is what a typical reset button looks like:

Router Reset Button

Reset buttons are usually tiny. Yours may look slightly different than this. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.

Hold the reset button down for 10 seconds and watch the lights. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.

Keep in mind that this will completely reset your Sitecom WL-312 router.

Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Sitecom WL-312

Now you need to log in using the factory default username and password. We have a WL-312 Login Guide with all this information ready for you.

Change Your Password

Be sure to change your router's default password after you get logged back in. The factory default passwords for routers are very well known. Our Choosing a Strong Password guide can help you pick a strong password for your router.

Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.

Other Sitecom WL-312 Guides

We have collected a lot of information about the Sitecom WL-312 router. You can find some of our additional content here.

This is the reset router guide for the Sitecom WL-312 v2. We also have the following guides for the same router: