Setup Router logo in white Setup router name logo in white
Get Software

Reset the TP-Link Archer GX90

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 4 minutes

If you need to reset your TP-Link Archer GX90 router back to factory settings, then this article shows you how. A router reset is very different than a router reboot. Every time your router loses power it reboots. A Router Reset completely erases the router and returns it to factory settings.

Warning: Make sure that you fully understand the following before resetting your router. A router reset will affect the following settings:

  • The router's username and password are reset.
  • All WiFi information such as network name, password, and authentication method are erased.
  • All ISP settings will reset to default, and you may have to contact your ISP.
  • All port forwards, firewall settings, and parental controls that you have configured will be removed.

Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other TP-Link Archer GX90 Guides

This is the reset router guide for the TP-Link Archer GX90 1.1.1. We also have the following guides for the same router:

Recover Password in TP-Link Archer GX90

If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.

Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

Do not do a full router reset until after you have tried every other option to log in to your router.

Reset the TP-Link Archer GX90

Usually there is a reset button located on the back or bottom of a router. A typical reset button looks like this:

Router Reset Button

Even though yours may look slightly different, you need to look for a tiny button. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Hold the reset button down for about 10 seconds while watching the lights on the front of your router. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. Do not be concerned about holding the reset button down too long. It will not hurt anything.

Just don't forget that this will totally reset your TP-Link Archer GX90 router.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the TP-Link Archer GX90

Now that you have finished resetting your router, you need to log in using the default username and password from the factory. You can follow the Archer GX90 Login Guide to find everything that you need to log in.

Change Your Password

After logging in to your router for the first time, you need to change your router's password. The factory default passwords for routers are very well known. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.

Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.

Other TP-Link Archer GX90 Guides

If you want additional help with your TP-Link Archer GX90 be sure to check out some of our other guides.

This is the reset router guide for the TP-Link Archer GX90 1.1.1. We also have the following guides for the same router: