This guide shows you how to reset your TP-Link Archer GX90 router to factory default settings. A router reset is very different than a router reboot. Unplugging a router from the wall reboots it. This is different from a reset because a reset completely erases all settings from the router.
Warning: Since this erases everything you have done to the router, there are some things you need to consider first. The following settings in your router will be changed:
- The router's login and password are reset to factory defaults.
- All WiFi settings are reset, including network name and password.
- Your ISP username and password will be reset, and you may have to contact your ISP.
- Any parental controls, firewall settings, or port forwards will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router you may want to try recovering your router password with our Router Password Finder.
Other TP-Link Archer GX90 Guides
This is the reset router guide for the TP-Link Archer GX90 1.0.1. We also have the following guides for the same router:
- TP-Link Archer GX90 1.0.1 - Login to the TP-Link Archer GX90
- TP-Link Archer GX90 1.0.1 - Information About the TP-Link Archer GX90 Router
- TP-Link Archer GX90 1.1.0 - Login to the TP-Link Archer GX90
- TP-Link Archer GX90 1.1.0 - Information About the TP-Link Archer GX90 Router
- TP-Link Archer GX90 1.1.0 - Reset the TP-Link Archer GX90
Recover Password in TP-Link Archer GX90
If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
Only after you have tried to recover your missing router username and password should you perform a full router reset.
Reset the TP-Link Archer GX90
On most routers you can find a small button on the back or the bottom labeled reset. What you are looking for is something that looks like this:
Your reset button may look different, but usually they are very small. You may need a paper clip to push the reset button.
Watch the front panel lights while you hold the reset button down for at least 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. Do not worry about holding the button down too long; this is harmless.
Keep in mind that this will completely reset your TP-Link Archer GX90 router.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the TP-Link Archer GX90
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. We have a Archer GX90 Login Guide with all this information ready for you.
Change Your Password
After logging in, you should really change your router's password for added security. It is a huge security risk to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: Write your new password down on a post-it note and stick it to the bottom of your router.
Other TP-Link Archer GX90 Guides
If you want additional help with your TP-Link Archer GX90 be sure to check out some of our other guides.
This is the reset router guide for the TP-Link Archer GX90 1.0.1. We also have the following guides for the same router:
- TP-Link Archer GX90 1.0.1 - Login to the TP-Link Archer GX90
- TP-Link Archer GX90 1.0.1 - Information About the TP-Link Archer GX90 Router
- TP-Link Archer GX90 1.1.0 - Login to the TP-Link Archer GX90
- TP-Link Archer GX90 1.1.0 - Information About the TP-Link Archer GX90 Router
- TP-Link Archer GX90 1.1.0 - Reset the TP-Link Archer GX90