Setup WiFi on the TP-Link TD-W8901N

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 4 minutes

The TP-Link TD-W8901N router is considered a wireless router because it offers WiFi connectivity. WiFi, or simply wireless, allows you to connect various devices to your router, such as wireless printers, smart televisions, and WiFi enabled smartphones.

Other TP-Link TD-W8901N Guides

This is the wifi guide for the TP-Link TD-W8901N 2.0.0. We also have the following guides for the same router:

WiFi Terms

Before we get started there is a little bit of background info that you should be familiar with.

Wireless Name

Your wireless network needs to have a name to uniquely identify it from other wireless networks. If you are not sure what this means we have a guide explaining what a wireless name is that you can read for more information.

Wireless Password

An important part of securing your wireless network is choosing a strong password.

Wireless Channel

Picking a WiFi channel is not always a simple task. Be sure to read about WiFi channels before making the choice.


You should almost definitely pick WPA2 for your networks encryption. If you are unsure, be sure to read our WEP vs WPA guide first.

Login To The TP-Link TD-W8901N

To get started configuring the TP-Link TD-W8901N WiFi settings you need to login to your router. If you are already logged in you can skip this step.

To login to the TP-Link TD-W8901N, follow our TP-Link TD-W8901N Login Guide.

Find the WiFi Settings on the TP-Link TD-W8901N

If you followed our login guide above then you should see this screen.

router setup
This is the setup page from your TP-Link TD-W8901N router.

We begin this guide on the Home page of the TP-Link TD-W8901N router. To change your wireless network settings click Interface Setup near the top of the page and then Wireless just beneath that.

Change the WiFi Settings on the TP-Link TD-W8901N

wifi wireless
This is the wifi setup page from your TP-Link TD-W8901N router.

This brings you to a new page.

Start out by making sure that the Channel is set to either 1, 6, or 11. Want to know why these are the best options? Take a look at our WiFi Channels Guide to find out.

Now make sure that the Use WPS option is set to No. Why? Read our What is WPS Guide to learn more.

After that you'll set an SSID. This will serve as your network identification and can be whatever you like. Due to security reasons, however, we highly suggest avoiding the use of any personal information. For more on this subject visit our Wireless Names Guide.

Below that is the Authentication Type. This needs to be set to WPA2-PSK. This option will provide you with the strongest security. To learn more check out our WEP vs. WPA Guide.

Now set the Encryption to AES.

Finally you'll need to set a Pre-Shared Key. This will be your network password and can be anything you want. However, bear in mind that a strong password is 14-20 characters in length and contains no personal information.

Congratulations! You're finished. Just don't forget to save your changes before closing the page.

Possible Problems when Changing your WiFi Settings

After making these changes to your router you will almost definitely have to reconnect any previously connected devices. This is usually done at the device itself and not at your computer.

Other TP-Link TD-W8901N Info

Don't forget about our other TP-Link TD-W8901N info that you might be interested in.

This is the wifi guide for the TP-Link TD-W8901N 2.0.0. We also have the following guides for the same router: