How to change the IP Address on a Ubee EVW321B router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Ubee EVW321B router.

Other Ubee EVW321B Guides

This is the ip address guide for the Ubee EVW321B. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Ubee EVW321B

To get started configuring the Ubee EVW321B LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Ubee EVW321B, follow our Ubee EVW321B Login Guide.

Change the LAN IP Address on a Ubee EVW321B

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Ubee EVW321B router.

When you need to change your IP Address, the address of your router, first log into the Ubee EVW321B. You begin on the Main page. First you need to click the blue box labeled Wijzig next to LAN IP adres.

Configure the LAN section of your Ubee EVW321B

router IP address lan home network
This is the lan page from your Ubee EVW321B router.

This should take you to the Gateway page. If not, highlight Gateway at the top of the page, then click Setup on the left.

On this new page, enter the new IP Address you have chosen for your router in the box labeled IP Address. We recommend using an address ending with a one, such as 10.0.0.1 or 192.168.1.1

When you have finished this change, click Apply near the bottom of the page.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Ubee EVW321B Info

Don't forget about our other Ubee EVW321B info that you might be interested in.

This is the ip address guide for the Ubee EVW321B. We also have the following guides for the same router: