Setup Router logo in white Setup router name logo in white
Get Software

Actiontec F2250 Port Forwarding Instructions

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 4 minutes

This page will show you how to setup a port forward on the Actiontec F2250 router.

If you are not sure what port forwarding is you can read our What is Port Forwarding guide to help get started.

Other Actiontec F2250 Guides

This is the port forwarding guide for the Actiontec F2250 Frontier. We also have the following guides for the same router:

Configure your Computer to Have a Static IP Address

Port forwarding the Actiontec F2250 to your computer can be more reliable if you first configure a static IP address on your computer. We have instructions to setup a static IP address for Windows 7, Windows 8, and a variety of other devices on our Static IP Address Settings page.

Please note that while setting up a static IP address on your computer is optional, it is still a very good idea to go ahead and do it. In the long run it will make your port forward much more reliable.

Login To The Actiontec F2250

To get started forwarding a port you need to login to your Actiontec F2250 router. If you are already logged in you can skip this step.

To login to the Actiontec F2250, follow our Actiontec F2250 Login Guide.

Forward a Port on the Actiontec F2250 router

Find The Port Forwarding Section of the Actiontec F2250

router status mac address internet IP
This is the status page from your Actiontec F2250 router.

You should now see the page you see above. To forward a port click the option in the red bar at the top of the page labeled Firewall. This opens up a new set of choices on the left side of the page. Choose the one titled Port Forwarding.

Configure the Port Forwarding section of your Actiontec F2250

Now to forward a port, make the following changes:

port forwarding nat screenshot
This is the port forwarding page from your Actiontec F2250 router.

This brings you to the page you see here. Let's begin at the top and work our way down:

In the Select Application drop down list choose the Custom option.

In the box labeled Application Name enter the name of the program. This is not a critical step to forwarding your ports. This will remind you in the future of why you forwarded this port.

Next is the Protocol drop down list. Choose the protocol type you want to use.

Now to forward those ports:

  • To forward a single port enter the single port number in both the Global Start Port and the End Port.
  • To forward a range of ports enter the lowest number in the range in the Global Start Port. Enter the highest number of the range into the End Port.

Enter the port you are forwarding into the box labeled Local Base Port.

Use the Select Device drop down menu to choose the option of Manually Enter Local IP Address.

Now enter the Local IP address you are forwarding these ports to in the box labeled Local Ip Address. Remember if you are forwarding a port for a program to run on a specific computer you need to enter that computer's IP address here.

Click the button labeled Add Rule and Apply.

Congratulations you did it.

Test if Your Ports are Open

Now that you have forwarded ports on the Actiontec F2250 you should test to see if your ports are forwarded correctly.

To test if your ports are forwarded you should use our Open Port Check tool.

Other Actiontec F2250 Info

Don't forget about our other Actiontec F2250 info that you might be interested in.

This is the port forwarding guide for the Actiontec F2250 Frontier. We also have the following guides for the same router: