Setup Router logo in white Setup router name logo in white
Get Software

Reset the Netgear WGT624

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 6 minutes

This article covers how to reset the Netgear WGT624 router back to factory default settings. This is a much bigger deal than a router reboot. Every time your router loses power it reboots. Resetting a router erases all settings from it and returns it to factory defaults.

Warning: Since this erases everything you have done to the router, there are some things you need to consider first. The following settings in your router will be changed:

  • The router's login and password are reset to factory defaults.
  • Your WiFi name and password are reset.
  • Your ISP settings are reset, which means you will have to contact your ISP to get them back.
  • Any parental controls, firewall settings, or port forwards will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other Netgear WGT624 Guides

This is the reset router guide for the Netgear WGT624. We also have the following guides for the same router:

Recover Password in Netgear WGT624

If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.

Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.

Router Password Finder - Recover Lost or Forgotten Router Passwords

Do not do a full router reset until after you have tried every other option to log in to your router.

Reset the Netgear WGT624

Most of the time you can find a small reset button located on either the back or the bottom of a router. What you are looking for is something that looks like this:

Router Reset Button

Your reset button may look different, but usually they are very small. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Hold the reset button down for about 10 seconds while watching the lights on the front of your router. The blinking pattern of the lights on the front of the router should change when the reset is complete. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.

Keep in mind that this will completely reset your Netgear WGT624 router.

Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.

Login to the Netgear WGT624

Now that you have finished resetting the router, you need to login to the router interface using the default username and password. We have a WGT624 Login Guide with all this information ready for you.

Change Your Password

Do not forget to change your router's default password when you log back into it. It is a huge security risk to leave your router's password set to the factory default. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.

Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.

Other Netgear WGT624 Guides

We have collected a lot of information about the Netgear WGT624 router. You can find some of our additional content here.

This is the reset router guide for the Netgear WGT624. We also have the following guides for the same router: