Setup Router logo in white Setup router name logo in white
Get Software

Reset the Trendnet TEW-435BRM

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 5 minutes

In this article, you will learn how to reset your Trendnet TEW-435BRM back to factory settings. This is not the same thing as rebooting a router. Turning a router off and back on again causes a reboot. However, when you reset a router you, return it back to its factory default settings.

Warning: Make sure that you fully understand the following before resetting your router. The following settings will be changed in your router:

  • The router's username and password are reset.
  • All WiFi information such as network name, password, and authentication method are erased.
  • If your router has any ISP settings they will be removed, and you will have to contact your ISP.
  • Any firewall settings, parental controls, and port forwards that you have configured will be removed.

Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.

Other Trendnet TEW-435BRM Guides

This is the reset router guide for the Trendnet TEW-435BRM v4. We also have the following guides for the same router:

Recover Password in Trendnet TEW-435BRM

If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.

Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

A router reset should be the last thing you try if you are unable to login.

Reset the Trendnet TEW-435BRM

Most of the time you can find a small reset button located on either the back or the bottom of a router. Look for something that looks like this:

Router Reset Button

Your reset button may look different, but usually they are very small. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Watch the front panel lights while you hold the reset button down for at least 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.

Just don't forget that this will totally reset your Trendnet TEW-435BRM router.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Trendnet TEW-435BRM

Now that you have finished resetting your router, you need to log in using the default username and password from the factory. We have a TEW-435BRM Login Guide with all this information ready for you.

Change Your Password

You need to change your router's default password after you log in for the first time. The factory default passwords for routers are very well known. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.

Other Trendnet TEW-435BRM Guides

This isn't our only Trendnet TEW-435BRM guide. We also have the following guides for this router.

This is the reset router guide for the Trendnet TEW-435BRM v4. We also have the following guides for the same router: