Setup Router logo in white Setup router name logo in white
Get Software

Reset the ZTE ZXV10 W300

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 4 minutes

This guide shows you how to reset your ZTE ZXV10 W300 router. Resetting a router is different than rebooting a router. Unplugging a router from the wall reboots it. This is different from a reset because a reset completely erases all settings from the router.

Warning: This is not a step to be taken lightly. When you reset your router, the following will happen.

  • The router's login credentials are reset.
  • Your WiFi login, password, and network name are reset.
  • Your ISP settings are reset, which means you will have to contact your ISP to get them back.
  • All port forwards, firewall settings, and parental controls that you have configured will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other ZTE ZXV10 W300 Guides

This is the reset router guide for the ZTE ZXV10 W300. We also have the following guides for the same router:

Recover Password in ZTE ZXV10 W300

If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.

Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

Only after you have tried to recover your missing router username and password should you perform a full router reset.

Reset the ZTE ZXV10 W300

Most routers have a small button on either the back or the bottom. A typical reset button looks like this:

Router Reset Button

Even though yours may look slightly different, you need to look for a tiny button. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. It is harmless to hold the reset button too long.

Remember, this will totally reset your ZTE ZXV10 W300 router.

This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.

Login to the ZTE ZXV10 W300

Now that you have finished resetting your router, you need to log in using the default username and password from the factory. You can find all of the information that you need in our ZXV10 W300 Login Guide.

Change Your Password

Be sure to change your router's default password after you get logged back in. It is a huge security risk to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.

Other ZTE ZXV10 W300 Guides

If you want additional help with your ZTE ZXV10 W300 be sure to check out some of our other guides.

This is the reset router guide for the ZTE ZXV10 W300. We also have the following guides for the same router: