Setup Router logo in white Setup router name logo in white
Get Software

Reset the ZTE ZXV10 W300

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 4 minutes

If you need to reset your ZTE ZXV10 W300 router back to factory settings, then this article shows you how. This is not the same thing as rebooting a router. Turning a router off and back on again causes a reboot. This is very different from a reset, which erases a router completely and returns it to factory default settings.

Warning: This is not a step to be taken lightly. A router reset will affect the following settings:

  • The router's login and password are reset.
  • Your WiFi name and password are reset.
  • All ISP settings will reset to default, and you may have to contact your ISP.
  • Any firewall settings, parental controls, or port forwards that you have configured will be removed.

Resetting your router should be considered the last step. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other ZTE ZXV10 W300 Guides

This is the reset router guide for the ZTE ZXV10 W300 v5. We also have the following guides for the same router:

Recover Password in ZTE ZXV10 W300

Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.

Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.

Router Password Finder - Recover Lost or Forgotten Router Passwords

If you are unable to recover your lost router password, then you may have to proceed with a full router reset.

Reset the ZTE ZXV10 W300

Usually there is a reset button located on the back or bottom of a router. This is what a typical reset button looks like:

Router Reset Button

Your reset button may look different, but usually they are very small. You may need a paper clip to push the reset button.

Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. The blinking pattern of the lights on the front of the router should change when the reset is complete. It is harmless to hold the reset button too long.

Just don't forget that this will totally reset your ZTE ZXV10 W300 router.

This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.

Login to the ZTE ZXV10 W300

Now that you have finished resetting your router, you need to log in using the default username and password from the factory. Just follow our ZXV10 W300 Login Guide to find all of the information that you need.

Change Your Password

Be sure to change your router's default password after you get logged back in. It's a very bad idea to leave your router's password set to the factory default. Our Choosing a Strong Password guide can help you pick a strong password for your router.

Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.

Other ZTE ZXV10 W300 Guides

Here are some of our other ZTE ZXV10 W300 guides that you might be interested in.

This is the reset router guide for the ZTE ZXV10 W300 v5. We also have the following guides for the same router: