Setup Router logo in white Setup router name logo in white
Get Software

How to change the IP Address on a ZTE ZXV10 W300 router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 4 minutes

This page shows how to change the LAN IP Address on the ZTE ZXV10 W300 router.

Other ZTE ZXV10 W300 Guides

This is the ip address guide for the ZTE ZXV10 W300 v5. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The ZTE ZXV10 W300

To get started configuring the ZTE ZXV10 W300 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the ZTE ZXV10 W300, follow our ZTE ZXV10 W300 Login Guide.

Change the LAN IP Address on a ZTE ZXV10 W300

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your ZTE ZXV10 W300 router.

When you have logged into the ZTE ZXV10-W300v5 you are taken to the Status page of this router. To change your LAN IP Address, the address you see when inside your local network, click the choice Interface Setup, then LAN.

Configure the LAN section of your ZTE ZXV10 W300

router setup
This is the setup page from your ZTE ZXV10 W300 router.

You are now on a page like the one you see above. Enter your new address you have picked out for your router in the box labeled Main IP Address. 192.168.0.1 and 10.0.0.1 are both good choices.

Leave the Main Subnet Mask as it is, 255.255.255.0

The DHCP should also be left enabled. This allows your router to choose from a prearranged group of addresses when needed.

When you have finished, click the Save button at the bottom of the page in orange.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other ZTE ZXV10 W300 Info

Don't forget about our other ZTE ZXV10 W300 info that you might be interested in.

This is the ip address guide for the ZTE ZXV10 W300 v5. We also have the following guides for the same router: