Setup Router logo in white Setup router name logo in white
Get Software

How to change the DNS settings on a Dlink AirPlus DI-614+ router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 5 minutes

This page shows how to change the DNS settings on the Dlink AirPlus DI-614+ router.

Other Dlink AirPlus DI-614+ Guides

This is the dns guide for the Dlink AirPlus DI-614+. We also have the following guides for the same router:

What is the DNS setting on a Router

When you connect a router to the Internet it gets a few settings from your ISP automatically. One of the settings that the ISP sets in your router is the DNS setting. DNS stands for Domain Name System and it is used to convert Internet names into actual IP addresses. For instance, when you go to "google.com", your are really connecting to an IP address that is mapped through DNS to a number such as:

  • 173.194.33.73

This mapping happens automatically every time you visit any page on the Internet.

Why Change Your Router's DNS Setting

Some ISPs choose to abuse the DNS system and map unknown names to servers that they control. This can be done in a way that you don't know it is happening since your router is getting its DNS settings from your ISP. For instance, if you have one of these ISPs who is hijacking your DNS, and you try to surf the web to "some-random-site.com" and "some-random-site.com" does not exist, you might get a page back from your ISP with local advertisements on it.

By changing your DNS setting in your router you will effectively change the DNS setting for every computer on your network. This is because when a device is connected to your network your router automatically hands out its own DNS settings to that device. This way you can protect your entire network from ISP hijacking with just one setting.

What Should I Change My DNS To

There are 2 really great DNS servers on the Internet that you can choose from right now: Google Public DNS and OpenDNS. If you are not sure which one to pick then just use Google Public DNS.

When you change the DNS settings in your router, you usually have to enter a Primary and a Secondary setting. The secondary is only used if the primary can not be located. Here are common settings:

If you want to use Google Public DNS, use the following settings:

  • Primary: 8.8.8.8
  • Secondary: 8.8.4.4

If you want to use OpenDNS, use the following settings:

  • 208.67.222.222
  • 208.67.220.220

Login To The Dlink AirPlus DI-614+

To get started configuring the Dlink AirPlus DI-614+ DNS page you need to login to your router. If you are already logged in you can skip this step.

To login to the Dlink AirPlus DI-614+, follow our Dlink AirPlus DI-614+ Login Guide.

Change the DNS settings on a Dlink AirPlus DI-614+

If you followed our login guide above then you should see this screen.

router setup
This is the setup page from your Dlink AirPlus DI-614+ router.

Starting from the Home page of the Dlink DI-614+ Router, click the WAN option on the left side of the page.

Configure the DNS section of your Dlink AirPlus DI-614+

router wan setup
This is the wan page from your Dlink AirPlus DI-614+ router.

You are now on the correct page to make changes to your DNS Server. In the box labeled Primary DNS Address enter the primary address of the DNS Server you want to use. Under that is the box labeled Secondary DNS Address, type in the secondary address of that DNS Server.

When you are finished, click the green Apply button in the lower right corner of the page.

You did it!

Possible Problems when Changing your DNS settings

Most devices on your network will not begin using the new DNS settings until they have been rebooted. After rebooting a device you can go to it's network settings and verify that it is using the DNS servers that you specified.

Other Dlink AirPlus DI-614+ Info

Don't forget about our other Dlink AirPlus DI-614+ info that you might be interested in.

This is the dns guide for the Dlink AirPlus DI-614+. We also have the following guides for the same router: