Setup Router logo in white Setup router name logo in white
Get Software

Reset the Netgear Nighthawk R7000

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 6 minutes

If you need to reset your Netgear Nighthawk R7000 router back to factory settings, then this article shows you how. This is not the same thing as rebooting a router. Rebooting a router is simply turning it off and back on again. Resetting a router erases all settings from it and returns it to factory defaults.

Warning: Proceed with caution; resetting your router can be a major headache. The following settings will be changed in your router:

  • The router's username and password are reset.
  • Your WiFi login, password, and network name are reset.
  • All ISP settings will reset to default, and you may have to contact your ISP.
  • Any firewall settings, parental controls, or port forwards that you have configured will be removed.

A router reset is the last step you should take in recovering your router's password. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.

Other Netgear Nighthawk R7000 Guides

Use a VPN

Have you considered using a VPN when you connect to the internet? A VPN is a great way to increase your security and anonymity while surfing.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes securely sharing your home network super simple. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

  • Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
  • Make sure that your VPN provider has lots of exit nodes all around the world.
  • Check that your VPN will not affect your speed.
  • Verify that your VPN provider uses WireGuard as the underlying protocol.
  • Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

NordVPN birthday deal!

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

This is the reset router guide for the Netgear Nighthawk R7000 v1.0.11.116_10.2.100. We also have the following guides for the same router:

Recover Password in Netgear Nighthawk R7000

Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.

Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.

Router Password Finder - Recover Lost or Forgotten Router Passwords

If you are unable to recover your lost router password, then you may have to proceed with a full router reset.

Reset the Netgear Nighthawk R7000

Don't forget to sign up for NordVPN's promo deal before it's gone.

NordVPN faster than ever deal!

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

Usually there is a reset button located on the back or bottom of a router. Look for something that looks like this:

Router Reset Button

Your reset button may look different, but usually they are very small. You may need a paper clip to push the reset button.

Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. The blinking pattern of the lights on the front of the router should change when the reset is complete. Do not worry about holding the button down too long; this is harmless.

Don't forget, this step will totally reset your Netgear Nighthawk R7000 router back to factory settings.

Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.

Login to the Netgear Nighthawk R7000

Now that you have finished resetting the router, you need to login to the router interface using the default username and password. You can find all of the information that you need in our Nighthawk R7000 Login Guide.

Change Your Password

Be sure to change your router's default password after you get logged back in. It is a huge security risk to leave your router's password set to the factory default. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.

Tip: Put your new password on a post-in note and stick it to the bottom of your router.

Other Netgear Nighthawk R7000 Guides

Here are some of our other Netgear Nighthawk R7000 guides that you might be interested in.

This is the reset router guide for the Netgear Nighthawk R7000 v1.0.11.116_10.2.100. We also have the following guides for the same router: