Reset the ZTE H369A

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 4 minutes

This is the reset guide for the ZTE H369A router. Resetting a router is different than rebooting a router. Unplugging a router from the wall reboots it. A Router Reset completely erases the router and returns it to factory settings.

Warning: This is not a step to be taken lightly. The following settings will be changed in your router:

  • The router's username and password are reset to factory defaults.
  • Your WiFi name and password are reset.
  • All ISP settings will reset to default, and you may have to contact your ISP.
  • All port forwards, firewall settings, and parental controls that you have configured will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router you may want to try recovering your router password with our Router Password Finder.

Other ZTE H369A Guides

This is the reset router guide for the ZTE H369A v1.01.00T03.8V4 (NL). We also have the following guides for the same router:

Recover Password in ZTE H369A

If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.

Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.

Router Password Finder - Recover Lost or Forgotten Router Passwords

Do not do a full router reset until after you have tried every other option to log in to your router.

Reset the ZTE H369A

Most routers have a small button on either the back or the bottom. Most reset buttons look like this:

Router Reset Button

Your reset button may look different, but usually they are very small. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.

Hold the reset button down for about 10 seconds while watching the lights on the front of your router. The blinking pattern of the lights on the front of the router should change when the reset is complete. Do not be concerned about holding the reset button down too long. It will not hurt anything.

Remember, this will erase everything you have previously done to this ZTE H369A router.

This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.

Login to the ZTE H369A

Once the reset is complete, you need to login to your router using the default IP address, username, and password. Our H369A Login Guide has all of the information that you need.

Change Your Password

Do not forget to change your router's default password when you log back into it. It's a very bad idea to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: Put your new password on a post-in note and stick it to the bottom of your router.

Other ZTE H369A Guides

This isn't our only ZTE H369A guide. We also have the following guides for this router.

This is the reset router guide for the ZTE H369A v1.01.00T03.8V4 (NL). We also have the following guides for the same router: