This page shows how to change the DNS settings on the Netgear FVS318v3 router.
When you connect a router to the Internet it gets a few settings from your ISP automatically. One of the settings that the ISP sets in your router is the DNS setting. DNS stands for Domain Name System and it is used to convert Internet names into actual IP addresses. For instance, when you go to "google.com", your are really connecting to an IP address that is mapped through DNS to a number such as:
This mapping happens automatically every time you visit any page on the Internet.
Some ISPs choose to abuse the DNS system and map unknown names to servers that they control. This can be done in a way that you don't know it is happening since your router is getting its DNS settings from your ISP. For instance, if you have one of these ISPs who is hijacking your DNS, and you try to surf the web to "some-random-site.com" and "some-random-site.com" does not exist, you might get a page back from your ISP with local advertisements on it.
By changing your DNS setting in your router you will effectively change the DNS setting for every computer on your network. This is because when a device is connected to your network your router automatically hands out its own DNS settings to that device. This way you can protect your entire network from ISP hijacking with just one setting.
When you change the DNS settings in your router, you usually have to enter a Primary and a Secondary setting. The secondary is only used if the primary can not be located. Here are common settings:
If you want to use Google Public DNS, use the following settings:
If you want to use OpenDNS, use the following settings:
To get started configuring the Netgear FVS318v3 DNS page you need to login to your router. If you are already logged in you can skip this step.
To login to the Netgear FVS318v3, follow our Netgear FVS318v3 Login Guide.
If you followed our login guide above then you should see this screen.
You are starting on the Router Status page of the Netgear FVS318v3. To change the Domain Name System or DNS settings, click the choice in the left side bar titled Basic Settings.
On this new page, find the bold heading of Domain Name Server (DNS) Address. Under this, tick the radio button that reads Use These DNS Servers.
You can now enter your own choice of DNS Servers. In the first set of boxes called Primary DNS, enter the main address of the DNS server you have chosen. This address is always accessed first.
Below that is the Secondary DNS. Enter the address of the DNS Server you want to become the secondary address. A secondary address is only used if the first can't be found.
Before exiting, be sure and click the Apply button.
That's it, you're done!
Most devices on your network will not begin using the new DNS settings until they have been rebooted. After rebooting a device you can go to it's network settings and verify that it is using the DNS servers that you specified.
Don't forget about our other Netgear FVS318v3 info that you might be interested in.