How to change the DNS settings on a Netgear FVS336Gv2 router

This page shows how to change the DNS settings on the Netgear FVS336Gv2 router.

Other Netgear FVS336Gv2 Guides

What is the DNS setting on a Router

When you connect a router to the Internet it gets a few settings from your ISP automatically. One of the settings that the ISP sets in your router is the DNS setting. DNS stands for Domain Name System and it is used to convert Internet names into actual IP addresses. For instance, when you go to "", your are really connecting to an IP address that is mapped through DNS to a number such as:

This mapping happens automatically every time you visit any page on the Internet.

Why Change Your Router's DNS Setting

Some ISPs choose to abuse the DNS system and map unknown names to servers that they control. This can be done in a way that you don't know it is happening since your router is getting its DNS settings from your ISP. For instance, if you have one of these ISPs who is hijacking your DNS, and you try to surf the web to "" and "" does not exist, you might get a page back from your ISP with local advertisements on it.

By changing your DNS setting in your router you will effectively change the DNS setting for every computer on your network. This is because when a device is connected to your network your router automatically hands out its own DNS settings to that device. This way you can protect your entire network from ISP hijacking with just one setting.

What Should I Change My DNS To

There are 2 really great DNS servers on the Internet that you can choose from right now: Google Public DNS and OpenDNS. If you are not sure which one to pick then just use Google Public DNS.

When you change the DNS settings in your router, you usually have to enter a Primary and a Secondary setting. The secondary is only used if the primary can not be located. Here are common settings:

If you want to use Google Public DNS, use the following settings:

If you want to use OpenDNS, use the following settings:

Login To The Netgear FVS336Gv2

To get started configuring the Netgear FVS336Gv2 DNS page you need to login to your router. If you are already logged in you can skip this step.

To login to the Netgear FVS336Gv2, follow our Netgear FVS336Gv2 Login Guide.

Change the DNS settings on a Netgear FVS336Gv2

If you followed our login guide above then you should see this screen.

For the Netgear FVS336Gv2 you should begin on the Router Status page. To change the Domain Name System settings, click the choice at the top of the page labeled Network Configuration. A new set of choices now appears below that, pick LAN Settings from this list. Then highlight the tab titled LAN Setup.

Configure the DNS section of your Netgear FVS336Gv2

On this new page, in the section labeled DHCP, find the four boxes titled Primary DNS Server. In these boxes, enter the main address of the DNS Server you wish to use. The address you enter here is the one that is always accessed first.

In the second set of boxes labeled Secondary DNS Server, enter the address of the DNS Server you want to be come secondary. The address you type in here is only used if the primary can't be located for some reason.

When you are finished changing the settings on this page, be sure to click the orange button at the bottom of the page that reads Apply.

That's all there is to it!

Possible Problems when Changing your DNS settings

Most devices on your network will not begin using the new DNS settings until they have been rebooted. After rebooting a device you can go to it's network settings and verify that it is using the DNS servers that you specified.

Other Netgear FVS336Gv2 Info

Don't forget about our other Netgear FVS336Gv2 info that you might be interested in.

Rachel Bauer

Written by

Rachel Bauer is an owner and primary author for She is available on Google+ and you can find more of her articles in the Networking section of our site.