This page shows how to change the LAN IP Address on the Netgear FVS336Gv3 router.
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
To get started configuring the Netgear FVS336Gv3 LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Netgear FVS336Gv3, follow our Netgear FVS336Gv3 Login Guide.
If you followed our login guide above then you should see this screen.
Now that you have logged into the Netgear FVS336Gv3 you see the Router Status page. When you need to change your IP Address, the only address you see when inside your private network, click the choice at the top of the page labeled Network Configuration. Under this, in the light blue bar, click LAN Settings, then the tab labeled LAN Setup.
On this new page, place your cursor in the first of four boxes labeled IP Address. Type in your new address in these boxes. For your Router a good choice would be the one you see in this screenshot, 192.168.1.1
Make sure you do not change the Subnet Mask, it needs to remain at 255.255.255.0
Finally, click Apply.
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Don't forget about our other Netgear FVS336Gv3 info that you might be interested in.