This page shows how to change the DNS settings on the Netgear R6300v2 router.
When you connect a router to the Internet it gets a few settings from your ISP automatically. One of the settings that the ISP sets in your router is the DNS setting. DNS stands for Domain Name System and it is used to convert Internet names into actual IP addresses. For instance, when you go to "google.com", your are really connecting to an IP address that is mapped through DNS to a number such as:
This mapping happens automatically every time you visit any page on the Internet.
Some ISPs choose to abuse the DNS system and map unknown names to servers that they control. This can be done in a way that you don't know it is happening since your router is getting its DNS settings from your ISP. For instance, if you have one of these ISPs who is hijacking your DNS, and you try to surf the web to "some-random-site.com" and "some-random-site.com" does not exist, you might get a page back from your ISP with local advertisements on it.
By changing your DNS setting in your router you will effectively change the DNS setting for every computer on your network. This is because when a device is connected to your network your router automatically hands out its own DNS settings to that device. This way you can protect your entire network from ISP hijacking with just one setting.
When you change the DNS settings in your router, you usually have to enter a Primary and a Secondary setting. The secondary is only used if the primary can not be located. Here are common settings:
If you want to use Google Public DNS, use the following settings:
If you want to use OpenDNS, use the following settings:
To get started configuring the Netgear R6300v2 DNS page you need to login to your router. If you are already logged in you can skip this step.
To login to the Netgear R6300v2, follow our Netgear R6300v2 Login Guide.
If you followed our login guide above then you should see this screen.
For the Netgear R6300v2 router, begin on the Basic Home page. To change the Domain Name System settings, click the tab at the top of the page labeled Advanced. A new set of choices will appear on the left side of the page. Pick the one labeled Setup, then Internet Setup.
This directs you to a page like the one you see above. Look down the page until you see the heading of Domain Name Server (DNS) Address.
Then, tick the radio button in this section labeled Use These DNS Servers.
You must now enter in your own choice of DNS Servers. In the next set of boxes, labeled Primary DNS, enter the main address of the DNS Server you have decided to use. Remember that the address entered in these boxes will always be accessed first.
Below that is the Secondary DNS. Enter the secondary address of the DNS Server here. This address is only going to be accessed if the first is unavailable.
That's about it, the only thing left to do is click the green Apply button at the top of the page.
Most devices on your network will not begin using the new DNS settings until they have been rebooted. After rebooting a device you can go to it's network settings and verify that it is using the DNS servers that you specified.
Don't forget about our other Netgear R6300v2 info that you might be interested in.