How to change the IP Address on a Netgear WGR614v10 router

This page shows how to change the LAN IP Address on the Netgear WGR614v10 router.

Other Netgear WGR614v10 Guides

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

It is generally a good idea to make the last number of your router's internal IP address a '1', as in or This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Netgear WGR614v10

To get started configuring the Netgear WGR614v10 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Netgear WGR614v10, follow our Netgear WGR614v10 Login Guide.

Change the LAN IP Address on a Netgear WGR614v10

If you followed our login guide above then you should see this screen.

When you decide to change your Router IP Address, the address you see from inside your private network, follow these steps:

1. Log into the Netgear WGR614v10, this takes you to the Basic Settings page.

2. Click the choice, on the left side bar, labeled LAN Setup.

Configure the LAN section of your Netgear WGR614v10

Place your cursor in the first of four boxes labeled IP Address, enter your new address here. One good choice for your Router is

Click Apply when you have finished.

Make sure that while you can change your IP Address for your Router, you need to leave the IP Subnet Mask at

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Netgear WGR614v10 Info

Don't forget about our other Netgear WGR614v10 info that you might be interested in.

Rachel Bauer

Written by

Rachel Bauer is an owner and primary author for She is available on Google+ and you can find more of her articles in the Networking section of our site.