How to Reset the Actiontec MI424WR

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 4 minutes

In this guide I will show you how to reset the Actiontec M1424-WR-Rev-C router. This is not the same thing as rebooting the router which is simply cycling the power by turning it off and back on again. Resetting is reverting the router back to factory defaults.

Warning: Resetting the router is serious and should not be taken lightly. Make sure you have tried other options of fixing the problem before continuing. Some of the things that need to be considered are as follows:

  • Your router username and password are reset.
  • The Wi-Fi username and password are reset.
  • If you use DSL you will need to re-enter the ISP username and password to continue to use the Internet. To get the details call your ISP.
  • All configurations you have made to your router in the past will be erased such as port forwards and firewalls.

Other Actiontec MI424WR Guides

This is the reset router guide for the Actiontec MI424WR Rev.C. We also have the following guides for the same router:

Reset the Actiontec MI424WR

While the router is on, turn it over so you are looking at the back panel.

router reset factory settings
This is the reset page from your Actiontec MI424WR router.

Using a pin or other small object press and hold the reset button for about 10 seconds. The reset process will begin approximately 10 seconds after you let go of the reset button. When it begins resetting all the lights on the front panel will turn off ans some of the lights begin to flash. The router is finished resetting when the power light glows steadily green.

Warning: Do not unplug or turn off the router during the reset process. This could cause permanent damage to the router.

Remember this erases everything you have done to personalize your router. Proceed with caution.

Login to the Actiontec MI424WR

Once you have reset the Actiontec M1424-WR-Rev-C router you need to login using the default username and password from the factory. We have a Login Guide for you to follow if you like.

Change Your Password

Next, after logging into the Actiontec M1424-WR-Rev-C you should change the password used to login to the router. This can be just about anything you like. For help creating a strong password check out this Choosing a Strong Password guide we have for you.

Tip: After making a new password it's a good idea to write it down on a piece of paper and attach it to the bottom of the router for safe keeping.

Setup WiFi on the Actiontec M1424-WR-Rev-C

It's a really good idea to setup your WiFi also. Some router manufacturers leave the security wide open as default meaning everyone can access your Internet. To secure your WiFi, use this How to Setup WiFi on the Actiontec M1424-WR-Rev-C guide.

Actiontec MI424WR Help

Be sure to check out our other Actiontec MI424WR info that you might be interested in.

This is the reset router guide for the Actiontec MI424WR Rev.C. We also have the following guides for the same router: