Actiontec MI424WR Port Forwarding Instructions

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 4 minutes

This page will show you how to setup a port forward on the Actiontec MI424WR router.

If you are not sure what port forwarding is you can read our What is Port Forwarding guide to help get started.

Other Actiontec MI424WR Guides

This is the port forwarding guide for the Actiontec MI424WR Rev.D. We also have the following guides for the same router:

Configure your Computer to Have a Static IP Address

Port forwarding the Actiontec MI424WR to your computer can be more reliable if you first configure a static IP address on your computer. We have instructions to setup a static IP address for Windows 7, Windows 8, and a variety of other devices on our Static IP Address Settings page.

Please note that while setting up a static IP address on your computer is optional, it is still a very good idea to go ahead and do it. In the long run it will make your port forward much more reliable.

Login To The Actiontec MI424WR

To get started forwarding a port you need to login to your Actiontec MI424WR router. If you are already logged in you can skip this step.

To login to the Actiontec MI424WR, follow our Actiontec MI424WR Login Guide.

Forward a Port on the Actiontec MI424WR router

Find The Port Forwarding Section of the Actiontec MI424WR

router status mac address internet IP
This is the status page from your Actiontec MI424WR router.

You start on the Main page of the Actiontec MI424-WR-Rev-D router. To forward a port, click the option at the top of the page labeled Firewall Settings. Then looking to the left, pick Port Forwarding.

Configure the Port Forwarding section of your Actiontec MI424WR

Now to forward a port, make the following changes:

port forwarding nat screenshot
This is the port forwarding page from your Actiontec MI424WR router.

You should now be on a page that looks a lot like the one you see above.

  • Using the drop down menu under the heading of Create new port forwarding rule, choose the IP address of the computer you are forwarding this port to.
  • Next is the Application to forward drop down menu. You can either pick a pre-configured application, or click Custom Ports.
  • If you chose Custom Ports, then you need to choose the type of protocol you wish to use from the Protocol drop down menu.
  • Then, type in the port you are going to be forwarding in the next box titled Port.
  • Tick the Add button, then farther down the page, pick Apply.

That's it, congratulations!

Test if Your Ports are Open

Now that you have forwarded ports on the Actiontec MI424WR you should test to see if your ports are forwarded correctly.

To test if your ports are forwarded you should use our Open Port Check tool.

Other Actiontec MI424WR Info

Don't forget about our other Actiontec MI424WR info that you might be interested in.

This is the port forwarding guide for the Actiontec MI424WR Rev.D. We also have the following guides for the same router: