Setup Router logo in white Setup router name logo in white
Get Software

Reset the Arris TG1682G

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 8 minutes

This guide shows you how to reset your Arris TG1682G router to factory default settings. A router reset is a much bigger deal than a router reboot. Turning a router off and back on again causes a reboot. This is different from a reset because a reset completely erases all settings from the router.

Warning: Make sure that you fully understand the following before resetting your router. A router reset will affect the following settings:

  • The router's username and password are reset.
  • Your WiFi login, password, and network name are reset.
  • All ISP settings will reset to default, and you may have to contact your ISP.
  • All parental controls, firewall settings, and port forwards will be removed.

Resetting your router should be considered the last step. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.

Other Arris TG1682G Guides

Use a VPN

Have you considered using a VPN when you connect to the internet? A VPN is a great way to increase your security and anonymity while surfing.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes securely sharing your home network super simple. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

  • Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
  • Make sure that your VPN provider has lots of exit nodes all around the world.
  • Check that your VPN will not affect your speed.
  • Verify that your VPN provider uses WireGuard as the underlying protocol.
  • Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

NordVPN birthday deal!

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

This is the reset router guide for the Arris TG1682G 9.1.103BP. We also have the following guides for the same router:

Recover Password in Arris TG1682G

If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Lost or Forgotten Router Password Recovery Tool

Do not do a full router reset until after you have tried every other option to log in to your router.

Reset the Arris TG1682G

Don't forget to sign up for NordVPN's promo deal before it's gone.

NordVPN birthday deal!

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

Usually there is a reset button located on the back or bottom of a router. This is what a typical reset button looks like:

Router Reset Button

Even though yours may look slightly different, you need to look for a tiny button. You may need a paper clip to push the reset button.

Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. The lights on the front of the router should do something different when the reset happens. Do not worry about holding the button down too long; this is harmless.

Keep in mind that this will completely reset your Arris TG1682G router.

Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.

Login to the Arris TG1682G

After you are finished resetting your router, you need to login in using the original factory username and password. You can follow the TG1682G Login Guide to find everything that you need to log in.

Change Your Password

After logging in to your router for the first time, you need to change your router's password. It's a very bad idea to leave your router's password set to the factory default. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.

Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.

Other Arris TG1682G Guides

This isn't our only Arris TG1682G guide. We also have the following guides for this router.

This is the reset router guide for the Arris TG1682G 9.1.103BP. We also have the following guides for the same router: