Setup Router logo in white Setup router name logo in white
Get Software

Reset the Arris TG1682G

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 8 minutes

This article covers how to reset the Arris TG1682G router back to factory default settings. This is not the same thing as rebooting a router. Turning a router off and back on again causes a reboot. A Router Reset completely erases the router and returns it to factory settings.

Warning: Proceed with caution; resetting your router can be a major headache. The following settings will be changed in your router:

  • The router's login and password are reset to factory defaults.
  • Your WiFi login, password, and network name are reset.
  • All ISP settings will reset to default, and you may have to contact your ISP.
  • All parental controls, firewall settings, and port forwards will be removed.

A router reset is the last step you should take in recovering your router's password. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.

Other Arris TG1682G Guides

This is the reset router guide for the Arris TG1682G TG1682_4.12p29s1_PROD_sey Xfinity. We also have the following guides for the same router:

Recover Password in Arris TG1682G

If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Recover Lost or Forgotten Router Passwords

A router reset should be the last thing you try if you are unable to login.

Reset the Arris TG1682G

Usually there is a reset button located on the back or bottom of a router. Most reset buttons look like this:

Router Reset Button

Yours may look slightly different, but they are usually tiny. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.

Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.

Just don't forget that this will totally reset your Arris TG1682G router.

Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.

Login to the Arris TG1682G

Once the reset is complete, you need to login to your router using the default IP address, username, and password. Just follow our TG1682G Login Guide to find all of the information that you need.

Change Your Password

You need to change your router's default password after you log in for the first time. It is a huge security risk to leave your router's password set to the factory default. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.

Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.

Other Arris TG1682G Guides

Here are some of our other Arris TG1682G guides that you might be interested in.

This is the reset router guide for the Arris TG1682G TG1682_4.12p29s1_PROD_sey Xfinity. We also have the following guides for the same router: