Setup Router logo in white Setup router name logo in white
Get Software

Reset the Arris TG1682G

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 7 minutes

This is the reset guide for the Arris TG1682G router. Resetting a router is different than rebooting a router. A reboot happens every time a router loses power. However, when you reset a router you, return it back to its factory default settings.

Warning: Before you proceed, there are a few things you need to know. When you reset your router, the following will happen.

  • The router's login and password are reset to factory defaults.
  • Your WiFi login, password, and network name are reset.
  • If your router has any ISP settings they will be removed, and you will have to contact your ISP.
  • Any port forwards, firewall settings, or parental controls that you have configured will be removed.

Resetting your router should be considered the last step. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other Arris TG1682G Guides

This is the reset router guide for the Arris TG1682G TG1682_3.3p18s1_PROD_sey Xfinity. We also have the following guides for the same router:

Recover Password in Arris TG1682G

Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Recover Lost or Forgotten Router Passwords

A router reset should be the last thing you try if you are unable to login.

Reset the Arris TG1682G

On most routers you can find a small button on the back or the bottom labeled reset. A typical reset button looks like this:

Router Reset Button

Yours may look slightly different, but they are usually tiny. You may need a paper clip to push the reset button.

Hold the reset button down for about 10 seconds while watching the lights on the front of your router. The lights on the front of the router should do something different when the reset happens. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.

Remember, this will totally reset your Arris TG1682G router.

This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.

Login to the Arris TG1682G

After you are finished resetting your router, you need to login in using the original factory username and password. Our TG1682G Login Guide has all of the information that you need.

Change Your Password

Do not forget to change your router's default password when you log back into it. It is a huge security risk to leave your router's password set to the factory default. Our Choosing a Strong Password guide can help you pick a strong password for your router.

Tip: Write your new password down on a post-it note and stick it to the bottom of your router.

Other Arris TG1682G Guides

Here are some of our other Arris TG1682G guides that you might be interested in.

This is the reset router guide for the Arris TG1682G TG1682_3.3p18s1_PROD_sey Xfinity. We also have the following guides for the same router: