Setup Router logo in white Setup router name logo in white
Get Software

Reset the Arris TG1682G

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 8 minutes

This guide shows you how to reset your Arris TG1682G router to factory default settings. A router reset is a much bigger deal than a router reboot. Turning a router off and back on again causes a reboot. This is very different from a reset, which erases a router completely and returns it to factory default settings.

Warning: Make sure that you fully understand the following before resetting your router. The following settings in your router will be changed:

  • The router's username and password are reset.
  • All WiFi information such as network name, password, and authentication method are erased.
  • Your ISP username and password will be reset, and you may have to contact your ISP.
  • Any parental controls, firewall settings, or port forwards will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other Arris TG1682G Guides

This is the reset router guide for the Arris TG1682G TG1682_3.14p10s1_PROD_sey Xfinity. We also have the following guides for the same router:

Recover Password in Arris TG1682G

Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.

Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.

Router Password Finder - Recover Lost or Forgotten Router Passwords

A router reset should be the last thing you try if you are unable to login.

Reset the Arris TG1682G

Most routers have a small button on either the back or the bottom. What you are looking for is something that looks like this:

Router Reset Button

Reset buttons are usually tiny. Yours may look slightly different than this. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.

Hold the reset button down for 10 seconds and watch the lights. The lights on the front of the router should do something different when the reset happens. Do not be concerned about holding the reset button down too long. It will not hurt anything.

Keep in mind that this will completely reset your Arris TG1682G router.

Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Arris TG1682G

Once the reset is complete, you need to login to your router using the default IP address, username, and password. You can find all of the information that you need in our TG1682G Login Guide.

Change Your Password

After logging in to your router for the first time, you need to change your router's password. It's a very bad idea to leave your router's password set to the factory default. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.

Tip: Put your new password on a post-in note and stick it to the bottom of your router.

Other Arris TG1682G Guides

This isn't our only Arris TG1682G guide. We also have the following guides for this router.

This is the reset router guide for the Arris TG1682G TG1682_3.14p10s1_PROD_sey Xfinity. We also have the following guides for the same router: