Setup Router logo in white Setup router name logo in white
Get Software

How to change the IP Address on a Belkin F9K1002 router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 6 minutes

This page shows how to change the LAN IP Address on the Belkin F9K1002 router.

Other Belkin F9K1002 Guides

Use a VPN Instead

Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

  • Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
  • Make sure that your VPN provider has lots of exit nodes all around the world.
  • Check that your VPN will not affect your speed.
  • Verify that your VPN provider uses WireGuard as the underlying protocol.
  • Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

NordVPN faster than ever deal!

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

This is the ip address guide for the Belkin F9K1002 v5. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

Don't forget to sign up for NordVPN's promo deal before it's gone.

NordVPN faster than ever deal!

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Belkin F9K1002

To get started configuring the Belkin F9K1002 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Belkin F9K1002, follow our Belkin F9K1002 Login Guide.

Change the LAN IP Address on a Belkin F9K1002

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Belkin F9K1002 router.

Now that you have logged into the Belkin F9K1002v5 you start on the Home page of this Router. To change your IP Address, the address you are on when inside your local network, click the choice labeled Local Network Settings, this is under Advanced Settings, with the sub-heading of LAN Settings.

Configure the LAN section of your Belkin F9K1002

router setup
This is the setup page from your Belkin F9K1002 router.

With the tab clicked Local Network Settings at the top, place your cursor in the first of the four boxes labeled LAN IP Address. Enter your new address in these boxes, one good choice is 192.168.0.1

Don't change anything else on this page. The only thing left to do is click the big green button labeled Save.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Belkin F9K1002 Info

Don't forget about our other Belkin F9K1002 info that you might be interested in.

This is the ip address guide for the Belkin F9K1002 v5. We also have the following guides for the same router: