Setup Router logo in white Setup router name logo in white
Get Software

How to Reset the Belkin F9K1002

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 6 minutes

In this guide we will show you how to reset the Belkin F9K1002v5 router back to it's original factory defaults.

Do you know the difference between resetting a router and rebooting a router? These two terms are often times confused. To reboot means to cycle the power to the device or turn it off and back on again. This does solve some problems you might be having with your router. To reset a router is different. It will take all the settings and return them back to how they were from the factory.

Warning: A reset could cause problems for you if you haven't considered the all the possible consequences. Please consider:

  • That the router's interface username and password are returned to factory defaults.
  • That the Internet name and password are returned to factory defaults.
  • If you have a DSL connection you need to re-enter the ISP username and password. Call your ISP for this information.
  • Any other settings you have changed in the past need to be reconfigured. This could include port forwards or IP addresses, etc.

Other Belkin F9K1002 Guides

This is the reset router guide for the Belkin F9K1002 v5. We also have the following guides for the same router:

Reset the Belkin F9K1002

Use a VPN

Have you considered using a VPN when you connect to the internet? A VPN is a great way to increase your security and anonymity while surfing.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes securely sharing your home network super simple. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

  • Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
  • Make sure that your VPN provider has lots of exit nodes all around the world.
  • Check that your VPN will not affect your speed.
  • Verify that your VPN provider uses WireGuard as the underlying protocol.
  • Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

NordVPN birthday deal!

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

Before you begin resetting the Belkin F9K1002v5 router you should find the tiny reset button. Typically it is found on the back panel or side panel of the device. We have circled it's location in the image below.

router reset factory settings
This is the reset page from your Belkin F9K1002 router.

Due to the small size of the reset button you need to use a small sharp object such as a sharpened pencil or pin to press and hold down the button for about 10 seconds. If you happen to just press and release the reset button you will only be rebooting the router instead of resetting it. This may be where a lot of the confusion between the two terms comes from.

Please be aware that all your settings are erased and returned to how they were from the factory. It is a good idea to try other methods of fixing your problem before resetting.

Login to the Belkin F9K1002

Once you have finished resetting the Belkin F9K1002v5 router you should login using the factory IP address, username, and password. These are found a couple different places. We have them included in our database. Refer to our Belkin F9K1002v5 Login Guide for more on that topic.

Change Your Password

The next step is to change the default password. It's never a good idea to leave the password as it's default value. If you need help changing the password take a look at our Choosing a Strong Password guide for tips and ideas.

Tip: It's important that you keep this password where you can find it. It may be years before you need it again. If you keep your router in your home it's okay to write it down on a piece of paper and attach it to the bottom of the router.

Setup WiFi on the Belkin F9K1002v5

This last section deals with WiFi security. Be sure to check these before you exit your router interface for the first time. We recommend using WPA2 with a strong password. We have a guide for that, simply click this link to take you there.

Don't forget to sign up for NordVPN's promo deal before it's gone.

NordVPN birthday deal!

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

Belkin F9K1002 Help

Be sure to check out our other Belkin F9K1002 info that you might be interested in.

This is the reset router guide for the Belkin F9K1002 v5. We also have the following guides for the same router: