Setup Router logo in white Setup router name logo in white
Get Software

How to Reset the Belkin F9K1102

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 4 minutes

In this guide we will talk about how to reset the Belkin F9K1102v1 router to factory settings.

First you need to know the difference between a router reset and a router reboot. To reboot a router is to cycle it's power by turning it off and back on again. This is done to solve some minor problems you may be having. When you reset a router you take all the settings and return them to how they were from the factory.

Warning: Resetting a router can cause more problems for you if you are unaware of what changes. Consider the following:

  • The router's main username and password are returned to original factory settings.
  • The Internet name and password are returned to factory settings.
  • If you have DSL you need to re-enter the ISP username and password. Call your ISP for more info. on this topic.
  • Any other settings such as port forwards or IP address changes are erased.

Other Belkin F9K1102 Guides

This is the reset router guide for the Belkin F9K1102 v1. We also have the following guides for the same router:

Reset the Belkin F9K1102

Use a VPN

Have you considered using a VPN when you connect to the internet? A VPN is a great way to increase your security and anonymity while surfing.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes securely sharing your home network super simple. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

  • Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
  • Make sure that your VPN provider has lots of exit nodes all around the world.
  • Check that your VPN will not affect your speed.
  • Verify that your VPN provider uses WireGuard as the underlying protocol.
  • Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

NordVPN birthday deal!

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

The first step in any reset is to find the reset button. This is typically a very small, recessed button found on the back panel or side panel of the device. We have found the location for you and circled it in red in the image below.

router reset factory settings
This is the reset page from your Belkin F9K1102 router.

Take the tip of a sharpened pencil or pen to press and hold the reset button for at least 10 seconds. Less than that and you only reboot the router instead of reset it.

Remember resetting the Belkin F9K1102v1 router is a serious step and all of your personal configurations are erased. We suggest trying other troubleshooting methods before continuing.

Login to the Belkin F9K1102

Once you have finished resetting the router you need to login using the proper default IP address, username, and password. We have found these for you and included them in our Login Guide for the Belkin F9K1102v1 router.

Change Your Password

After a successful login you need to change your default password. This is important especially if the password is blank by default. To create a strong password check out our guide titled Choosing a Strong Password.

Tip: If you keep your router in a fairly secure location, like your home, it's alright to write this password down on a piece of paper and attach it to the bottom of the router for future reference.

Setup WiFi on the Belkin F9K1102v1

Finally, let's discuss the WiFi settings. These include the security method, username and password. We recommend using WPA2 with a strong password. Learn more in our How to Setup WiFi on the Belkin F9K1102v1.

Don't forget to sign up for NordVPN's promo deal before it's gone.

NordVPN faster than ever deal!

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

Belkin F9K1102 Help

Be sure to check out our other Belkin F9K1102 info that you might be interested in.

This is the reset router guide for the Belkin F9K1102 v1. We also have the following guides for the same router: