Setup Router logo in white Setup router name logo in white
Get Software

How to Reset the Huawei B593s-22

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 6 minutes

Have you tried to login to the Huawei B593s-22 router and been unsuccessful? It might be time to consider a reset.

It is important to know that a reset is not a reboot. A reboot is a cycle in the power to the unit. No settings are changed in a reset. A reset is taking all the settings and making sure they are at the default values.

Warning: Resetting the Huawei B593s-22 router is a big step and should be thought through before continuing. Take a moment to consider the following:

  • The router username and password.
  • The WiFi username and password.
  • If this is a DSL router you need to re-enter the ISP (Internet Service Provider) username and password. Call your local ISP for these details.
  • Have you made any other changes to this device? This could include port forwards or IP addresses.

Other Huawei B593s-22 Guides

This is the reset router guide for the Huawei B593s-22 V200R001B180D20SP00C186 Zain. We also have the following guides for the same router:

Reset the Huawei B593s-22

For the Huawei B593s-22 router the reset button is located on the side-panel of the unit. See the image below for an exact location.

router reset factory settings
This is the reset page from your Huawei B593s-22 router.

First of all, make sure the router is on. Then take a straightened paperclip or other similar object and press down on the reset button for about 10 seconds. This begins the reset process which can take a couple minutes to complete. If you don't hold this button down for the entire amount of time you end up only rebooting the router instead of resetting it like you wanted.

Remember a reset erases every single setting you have ever changed in the lifetime of this device. We strongly recommend trying other methods of troubleshooting before you continue.

Login to the Huawei B593s-22

After you've reset the Huawei B593s-22 router you'll need to log into it. This is accomplished by using the factory default username and password. Not sure where you can find these? We have them provided for your use in our Login Guide.

Tip: If the defaults aren't working for you it could be because the reset button wasn't held down for long enough.

Change Your Password

Now that you've successfully reset and logged into your router we suggest setting a new password for it. Keep in mind that this password will only protect your router settings, not your wireless network. All the same, setting a strong password is always a good choice. For more help be sure to take a look through our Choosing a Strong Password Guide.

Tip: Avoid losing your new password by writing it on a slip of paper and taping it to the bottom of your router.

Setup WiFi on the Huawei B593s-22

It is now time to begin the reconfiguration process. Take the time to setup your WiFi settings properly. Use our Huawei B593s-22 WiFi Guide for great step-by-step instructions.

Huawei B593s-22 Help

Be sure to check out our other Huawei B593s-22 info that you might be interested in.

This is the reset router guide for the Huawei B593s-22 V200R001B180D20SP00C186 Zain. We also have the following guides for the same router: