Arris TG1682G WiFiConnection

This is the WiFiConnection screen from the Arris TG1682G router.



Keywords on The Arris TG1682G WiFiConnection Screenshot

The following words were detected on the Arris TG1682G WiFiConnection screenshot.

Xfinity   Skip to content Hi admin   •   Logout   •   Change Password 0% Internet Loading... Wi-Fi Loading... MoCA Loading... Low Security Loading... Gateway At a Glance Connection Status XFINITY Network Local IP Network Wi-Fi MoCA Firewall IPv4 IPv6 Software Hardware System Hardware Battery LAN Wireless Wizard Connected Devices Devices Range Extenders Parental Control Managed Sites Managed Services Managed Devices Reports Advanced Port Forwarding Port Triggering Remote Management QoS DMZ Device Discovery Troubleshooting Logs Diagnostic Tools Reset/Restore Gateway Change Password Gateway > Connection > Wi-Fi Manage your Wi-Fi connection settings. Click EDIT next to the Network Name you'd like to modify its Wi-Fi network settings: Network Name (SSID), Mode, Security Mode, Channel, Network Password (Key), and Broadcasting feature. MAC Filter Setting is specific to each Network Name (SSID). Select a MAC Filtering Mode. Allow- All (Default): All wireless client stations can connect to the Gateway; no MAC filtering rules. Allow: Only the devices in the "Wireless Control List" are allowed to connect to the Gateway. Deny: Wireless devices in the "Wireless Control List" are not allowed to connect to the Gateway. Wireless Control List: Displays the wireless devices (by Network Name and MAC Address) that were manually added or auto-learned. Auto-Learned Wireless Devices are currently connected to the Gateway. Manually-Added Wireless Devices: Enter a unique name and MAC address for the wireless device you want to manually add, then click ADD. Wi-Fi Radio(2.4 GHz)         : Wi-Fi Radio(5 GHz)            : Private Wi-Fi Network Name Frequency Band: MAC Address Security Mode   2.4GHz WPAWPA2-PSK (TKIP/AES) Edit 5GHz WPAWPA2-PSK (TKIP/AES) Edit Add Wi-Fi Protected Setup (WPS) Client Public Wi-Fi Network Name Frequency Band MAC Address Security Mode   There are no valid public Wi-Fi found! 2.4GHz Wireless Basic Setting Mode: 802.11 n 802.11 g/n 802.11 b/g/n Transmit Power: 100% 75% 50% 25% 12.5% Channel Selection: Manual Automatic Channel: 1 2 3 4 5 6 7 8 9 10 11 11 2.4GHz Wireless Advanced Setting BG Protection Mode: Auto Manual IGMP Snooping Disable Enable Operation Mode: Mixed Mode Green Field Channel Bandwidth: 20 20/40 Guard Interval: 400ns 800ns Auto Reverse Direction Grant Disable Enable Extension Channel: 2442MHz(Channel5) Extension Channel: 2447MHz(Channel6) Extension Channel: 2452MHz(Channel7) Extension Channel: 2457MHz(Channel8) Extension Channel: 2462MHz(Channel9) 2437MHz(Channel1) Extension Channel: 2467MHz(Channel10) 2427MHz(Channel2) Extension Channel: 2472MHz(Channel11) 2432MHz(Channel3) Extension Channel: 2437MHz(Channel4) Extension Channel: 2442MHz(Channel5) Extension Channel: 2447MHz(Channel6) Extension Channel: 2452MHz(Channel7) Extension Channel: Auto Aggregation MSDU(A-MSDU) Disable Enable Auto Block Ack: Disable Enable Decline BA Request: Disable Enable HT TxStream: 3 2 1 HT RxStream: 3 2 1 WMM Power Save: This item depends on WMM. Enable WMM in atleast one SSID to make this work. STBC: Disable Enable 5GHz Wireless Basic Setting Mode: 802.11 n 802.11 ac 802.11 n/ac 802.11 a/n/ac Transmit Power: 100% 75% 50% 25% 12.5% Channel Selection: Manual Automatic Channel: 36 40 44 48 52 56 60 64 100 104 108 112 116 132 136 140 149 153 157 161 165 36 5GHz Wireless Advanced Setting BG Protection Mode: Auto Manual IGMP Snooping Disable Enable Operation Mode: Mixed Mode Green Field Channel Bandwidth: 20 20/40 20/40/80 Guard Interval: 400ns 800ns Auto Reverse Direction Grant Disable Enable Aggregation MSDU(A-MSDU) Disable Enable Auto Block Ack: Disable Enable Decline BA Request: Disable Enable DFS Channel Selection In Auto Mode: Disable Enable HT TxStream: 3 2 1 HT RxStream: 3 2 1 WMM Power Save: This item depends on WMM. Enable WMM in atleast one SSID to make this work. STBC: Disable Enable MAC Filter Setting You can control the Wi-Fi access to the USG using the below Mac-Filter settings. SSID: MAC Filtering Mode: Allow-All Allow Deny Wi-Fi Control List(up to 16 items) # Device Name MAC Address   null null null null Auto-Learned Wi-Fi Devices Device Name MAC Address   name 00:00:00:00:00:00 add null null null Manually-Added Wi-Fi Devices Device Name MAC Address   : : : : : null null null Wi-Fi Client Setup Configuration(WPS) You must enable WPS to connect your device to this device SSID: SSID: 1 WPS: Security: Encryption: AP PIN:         14366406 WPS Pin Method: Connect to your WPS-supported device SSID: Push Button(recommended)     Push the WPS button on the Gateway or click "PAIR WITH MY Wi-Fi CLIENT" below to connect your     Wireless client to your network. PIN Number     If your Wireless client supports WPS(PIN Type), enter the PIN Number here.     Enter Wireless Client's PIN Xfinity.com •   customerCentral •   User Guide