Setup Router logo in white Setup router name logo in white
Get Software

Setup WiFi on the Belkin F6D4230-4

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 6 minutes

The Belkin F6D4230-4 router is considered a wireless router because it offers WiFi connectivity. WiFi, or simply wireless, allows you to connect various devices to your router, such as wireless printers, smart televisions, and WiFi enabled smartphones.

Other Belkin F6D4230-4 Guides

This is the wifi guide for the Belkin F6D4230-4 v3. We also have the following guides for the same router:

WiFi Terms

Before we get started there is a little bit of background info that you should be familiar with.

Wireless Name

Your wireless network needs to have a name to uniquely identify it from other wireless networks. If you are not sure what this means we have a guide explaining what a wireless name is that you can read for more information.

Wireless Password

An important part of securing your wireless network is choosing a strong password.

Wireless Channel

Picking a WiFi channel is not always a simple task. Be sure to read about WiFi channels before making the choice.

Encryption

You should almost definitely pick WPA2 for your networks encryption. If you are unsure, be sure to read our WEP vs WPA guide first.

Login To The Belkin F6D4230-4

To get started configuring the Belkin F6D4230-4 WiFi settings you need to login to your router. If you are already logged in you can skip this step.

To login to the Belkin F6D4230-4, follow our Belkin F6D4230-4 Login Guide.

Find the WiFi Settings on the Belkin F6D4230-4

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Belkin F6D4230-4 router.

You begin on the Status page of the Belkin F6D4230-4-v3 router. To configure the WiFi settings click the Channel and SSID choice on the left side of the page.

Change the WiFi Settings on the Belkin F6D4230-4

router Wi-Fi channel ssid mode
This is the wifi channel page from your Belkin F6D4230-4 router.

In the Wireless Channel drop down box, make sure you are on either channel 1,6, or 11. There is only room in the spectrum for up to three channels that don't overlap. These three don't overlap. Overlapping channels cause problems. Check out our guide for more information on this topic, WiFi channels.

The only other setting that needs to be changed is the SSID. This is the name you give your network so you can identify it. You should create an original name here, but avoid using any personal information. Check out our guide for more information, Wireless names.

Click the Apply Changes button when you are done. Then, click the Security choice in the left sidebar.

router wifi security wireless
This is the wifi security page from your Belkin F6D4230-4 router.

This takes you to a page like the one you see here.

First, change the Security Mode. There are several different choices here, check out our guide titled WEP vs. WPA. We suggest using the choice of WPA/WPA2-Personal (PSK).

Next is the Authentication. This is just further narrowing down your choice of security. We recommend the choice of WPA2-PSK.

After that is the Encryption Technique. There should be two choices here, TKIP and AES. TKIP is older and not as secure of AES. We recommend using the option of AES.

The last thing you must change is the Password (PSK), This could also be called the Pre-Shared Key. This password is the one you use to access your network. It is also used in the encryption technique. You need to create a strong password that can't easily be cracked by a program or by guessing. Create a password of at least 20 characters. Avoid using personal information as this can easily be guessed. Don't use any real words that can be found in a dictionary as these can be cracked by programs very quickly. This password should look random with some symbols, numbers, and capital letters. We have created a guide that can help you come up with a strong password that is memorable, Choosing a strong password.

Once you have finished these, click the Apply Changes button.

Possible Problems when Changing your WiFi Settings

After making these changes to your router you will almost definitely have to reconnect any previously connected devices. This is usually done at the device itself and not at your computer.

Other Belkin F6D4230-4 Info

Don't forget about our other Belkin F6D4230-4 info that you might be interested in.

This is the wifi guide for the Belkin F6D4230-4 v3. We also have the following guides for the same router: